ISO8859-1Wh;b[E R>  Y qB X  + g  i +INSTALL MICROCODE %1$s %2$sMicrocode has been successfully updated to level %1$s on the following resources: %2$sMicrocode has been successfully updated to level %1$s on the following resources: %2$s Please run diagnostics on these resources to ensure that they are functioning properly. *** FAILURE *** FAILURE *** FAILURE *** The following resources failed to update and are at microcode level %3$s: %4$s Run Diagnostics on these resources to isolate the problem.Please run diagnostics on the listed resources to ensure that the adapter is functioning properly. *** NOTICE *** NOTICE *** NOTICE *** An error was detected while unconfiguring %1$s. Unable to restore the resource to its original state. Please run diagnostics on it to ensure that the adapter is functioning properly. *** NOTICE *** NOTICE *** NOTICE *** The Configuration Database was not updated for the following resources: %1$s Please run: rmdev -l -R cfgmgr -l to get the Configuration Database updated. Until this is done, neither lscfg nor the Display Microcode diagnostic task will reflect the correct microcode information.The resource %1$s represents a port on this multi-port, multi-function fibre channel over ethernet adapter. It is currently in use. Free the resource and attempt the microcode installation again. *** NOTICE *** NOTICE *** NOTICE *** An error was detected while unconfiguring %1$s. Unable to restore the resource to its original state. Please run diagnostics on it to ensure that the adapter is functioning properly.The resource %1$s represents a port on this multi-port, multi-function fibre channel over ethernet adapter. In order to update the microcode on this adapter, at least one of the fibre channel resources on it must be configured. Attempt the microcode installation again, once a fibre channel resource on this adapter has been configured. *** NOTICE *** NOTICE *** NOTICE *** %1$s represents a port on a multi-port, multi-function fibre channel over ethernet adapter. In order to update the microcode on this adapter, the microcode on the following ports will also be updated: %2$s. If there are any other ports of this adapter that are not currently defined as resources, they will use the new microcode when they are configured. *** NOTICE *** NOTICE *** NOTICE *** %1$s represents a port on a multi-port, multi-function fibre channel over ethernet adapter. Updating the microcode on one port updates the microcode on all ports, whether or not they are currently configured.The microcode installation occurs while the resources are available for use. It is recommended that the installation be scheduled during non-peak production periods.If any drives are attached to this adapter, make sure that a current backup is available.Use Enter to continue installation. Use F3 to cancel installation.A software error occurred. Contact the service support structure for further assistance. *** NOTICE *** NOTICE *** NOTICE *** The system configuration indicates that there are client processes using this adapter. Microcode Download can not proceed under these circumstances. *** NOTICE *** NOTICE *** NOTICE *** %1$s represents a port on a multi-port fiber channel. In order to update the microcode on this adapter, the microcode on the following ports will also be updated: %2$s. If there are any other ports of this adapter that are not currently defined as resources, they will use the new microcode when they are configured. *** NOTICE *** NOTICE *** NOTICE *** %1$s represents a port on a multi-port fiber, channel adapter. Updating the microcode on one port updates the microcode on all ports, whether or not they are currently configured.