# @(#)02 1.7 src/tcpip/etc/dhcpcd.ini, dhcp, tcpip720 12/8/95 11:01:56
# IBM_PROLOG_BEGIN_TAG
# This is an automatically generated prolog.
#
# tcpip720 src/tcpip/etc/dhcpcd.ini 1.7
#
# Licensed Materials - Property of IBM
#
# Restricted Materials of IBM
#
# COPYRIGHT International Business Machines Corp. 1995
# All Rights Reserved
#
# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#
# IBM_PROLOG_END_TAG
#
# dhcpcd.ini -- DHCP Client configuration file
#
#
# This file contains directives that can be specified by the
# to configure the client.
#
#
# Do not put any long line without white space in this file.
#
# A line starting with a '#' character is a comment and is ignored.
# A '#' on a line which is not part of a quoted string indicates
# that anything to the right of this character is a comment and should
# be ignored.
#
# A continuation character of '\' is supported. It must be
# the last non-whitespace character on the line prior to
# any comments.
#
#
#
# The directives are specified in the form of
# <keyword> <value1> ... <valueN>.
#
# Here is a list of all the keywords whose value can be specified
# in this file:
#
# Keyword Effect
# ------------- ---------------------------------------------------
#
# numLogFiles The number of log files desired.
# logFileSize The Size of log files in K bytes.
# logFileName The name of the most recent log file.
# logItem One item to be logged.
#
# interface The network interface that needs DHCP configuration.
# clientid Specifies whether the client id included in all
# packets to the server should be the hardware MAC
# address or the HOSTNAME.
# smiffer A command string to execute to start a program to
# detect hardware failure/recovery of the network
# adapter.
# updateDNS A command string to execute to cause the DNS server
# to be updated with the new IP address for the
# given name.
# option An option requested by this client
# vendor A vendor extension option
# reject An option to be ignored if sent by a server
# otherOptions Whether to process options not specifically
# requested or rejected in this client config file.
#
#
# Log files. This set of parameters specifies the log files that will be
# maintained by this server. Each parameter is identified by a keyword
# and followed by its value.
#
# Keyword Value Definition
# -------- ------------ ------------------------------------------
# numLogFiles 0 to n number of log files. If 0 is specified,
# no log file will be maintained and no log
# message is display anywhere. n is the
# maximum number of log files maintained as
# the size of the most recent log file
# reaches its maximum size and a new log file
# is created.
#
# logFileSize in K bytes maximum size of a log file. When the size
# of the most recent log file reaches this
# value, it is renamed and a new log file is
# created.
#
# logFileName file path name of the most recent log file. Less
# recent log files have the number 1 to
# (n - 1) appended to their names; the larger
# the number, the less recent the file.
#
# logItem One item that will be logged.
# SYSERR System error, at the interface to the platform.
# OBJERR Object error, in between objects in the process.
# PROTERR Protocol error, between client and server.
# WARNING Warning, worth of attention from the user.
# EVENT Event occurred to the process.
# ACTION Action taken by the process.
# INFO Information that might be useful.
# ACNTING Who was served when.
# TRACE Code flow, for debugging.
#
#
numLogFiles 4
logFileSize 100
logFileName /usr/tmp/dhcpcd.log
logItem SYSERR
logItem OBJERR
#logItem PROTERR
#logItem WARNING
#logItem EVENT
#logItem ACTION
#logItem INFO
#logItem ACNTING
#logItem TRACE
#
# Network interface. This parameter specifies a network interface
# that needs DHCP configuration. The keyword and its values are as
# follows:
#
# Keyword Value Definition
# -------- ------------ ------------------------------------------
# interface <ifName>
#
# DHCP interface. ifName is the name of
# the network interface or any ro represent the
# first found or all to do all found interfaces
#
# The interface statement may be immediately followed
# by a pair of curly brackets, in which
# the options requested for this interface can be
# specified. Options requested within
# interface curly brackets apply only to
# this interface.
# Note: It may be desirable that the client can automaticly detect a
# network interface via which DHCP is to be performed. Until
# such a mechanism becomes available, this parameter needs to be
# specified in this config file.
#
# clientid MAC or HOSTNAME
# The client id to use in all communication
# with the server. MAC denotes that the
# hardware address for the particular interface
# should be used as the client id. HOSTNAME
# denotes that the domain host name should
# be used as the client id.
# The default is HOSTNAME. The bottom of the
# file sets MAC. MAC is better for NIM
# environments.
#
# sniffer exec string A string enclosed in quotes to indicate a
# program to execute to detect hardware
# failure/recovery for an interface. The
# dhcp client will look for signal 23 to
# indicate that the network is up and signal
# 16 to indicate that the network is down.
#
# updateDNS exec string A string enclosed in quites to indicate a
# program to execute to update the DNS server
# with the new IP address for the given name.
# This string should include four %s's to
# indicate the placement of the following
# information from the dhcp client:
#
# hostname - This is the value of option 12.
# The value returned by the dhcp server, is used
# if one is supplied. Else, if the client specified
# a value (in THIS file) the client requested value
# is used. If neither the client specified a
# requested hostname nor the server supplied one,
# this exec string will not be executed.
#
# domainname - This is the value of option 15.
# The value returned by the dhcp server, is used
# if one is supplied. Else, if the client specified
# a value (in THIS file) the client requested value
# is used. If neither the client specified a
# requested hostname nor the server supplied one,
# A null string ("") will be supplied by dhcp. Thus,
# this value is deemed optional.
#
# Ip Address - This is the IP address leased to this client
# by the server. The string is supplied in dotted
# notation, ie 9.2.23.43.
#
# leasetime - This is the lease time granted by the server.
# This string is a decimal number representing the
# number of seconds of the lease.
#
# These values are output by dhcp in this order:
# hostname domainname Ip Address leasetime
#
# A script /usr/sbin/dhcpaction has been provided with this functionality
# as well as actions to help NIM interact with DHCP clients.
#
# /usr/sbin/dhcpaction hostname domainnaim ipaddress leasetime REC NIM
# The first four parameters are what will be used to update the DNS
# server. The fifth parameter tells dhcpaction to update the A record,
# the PTR record, or Both, or None. The options are A, PTR, BOTH, NONE.
# The sixth parameter is used to tell servers that NIM is being used
# and processing needs to be done when a client changes address. The
# options for this are NIM and NONIM. On clients, this needs to be
# set to NONIM.
#
# option <code> [<value>] [exec <string>]
# An option requested by this client. Its
# scope is determined by whether it is inside
# a set of curly braces for a particular
# interface, or if it is outside all curly
# braces. If outside, it applies to all
# interfaces.
#
# Code is the option code of the option
# requested.
#
# Value is the requested value for that option.
# This value is passed to the server with the
# option. The value is not required.
#
# The keyword exec denotes a string following
# which should be executed if this option
# is returned by the server. This string
# is expected to be an executable shell script
# or program. A "%s" may be included in the
# string. If present, the value returned by
# the server will be provided in ascii.
#
# vendor Special syntax for the specification of
# the vendor extensions field. Is it followed
# by a set of curly braces. Inside the
# curly braces, the options and values for
# the vendor extensions field are specified.
# An exec function for the vendor option should
# be placed on the same line as the "vendor" keyword,
# using the same syntax as on the other option lines.
# The exec string on an option inside the
# vendor extensions options is not valid. It
# is ignored.
#
# reject <code> Specified that if this option code is
# returned by the server, this option
# should be ignored by the client. Its
# value should not be used.
#
# otherOptions accept or reject
# Specifies how all other options should
# be handled by the client. This refers
# to any options not specifically requested
# with an "option" statement or rejected
# with a "reject" statement. The default
# is that all options are accepted.
#
#
#
#sniffer "ifsniff -c -itr0"
#option 60 foo
updateDNS "/usr/sbin/dhcpaction '%s' '%s' '%s' '%s' A NONIM >> /tmp/updns.out 2>&1 "
clientid MAC