S_PREREQCHECKER_APP_NAME=Prerequisite CheckerS_SPECIFY_JRE_LOCATION=Please specify JRE/JDK location ( Ex. /home/jre ), /bin/java should exist :S_ERRORINVOKINGFROMCD=Error: The Oracle Universal Installer cannot be invoked with the argument %s from the CD. Please invoke the Oracle Universal Installer from an installed location to perform this operation.S_BOOTSTRAPONLYMSG=Preparing to BootstrapS_SFAILED_ON_NEWLINE= Failed <<<< S_ERRORRET=Error returned:%s:S_EROPEN= ERROR: Unable to open %s S_CONTINUE_NO= User Selected: No S_CHECKING_FOR_KERNEL_VERSION= Checking for Kernel version %s S_CHECKING_FOR_SWAP= Checking swap space: must be greater than %s MBS_ERBOOTSTRAP_RANGE= Error in specifying bootstrap size in oraparam.ini. Please ensure that the value set is positive and not more than %d MB. S_ERABS_PATH=Unable to get absolute path for %s S_ERRINVPRM=You do not have sufficient permissions to access the inventory '%s'. Installation cannot continue. It is required that the primary group of the install user is same as the inventory owner group. Make sure that the install user is part of the inventory owner group and restart the installer.S_ERPERDSP_1=Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable: S_ERPERDSP_2=- For csh: %% setenv DISPLAY 192.168.1.128:0.0 S_INVALID_JDK_HOME= Invalid JDK passed. Please specify JDK location ( Ex. /home/jdk ), /bin/java should exist. S_ERPERDSP_3=- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY S_ERPERDSP_4=Use the following command to see what shell is being used: S_ERPERDSP_5= echo $SHELL S_NUMBER_OF_FILES_BOOTSTRAPPED= The number of files bootstrapped for the %s is %d.S_ERPERDSP_6=Use the following command to view the current DISPLAY environment variable setting: S_GMAKE_RIGHT_VERSION_MSG=Gmake is version %s S_ERORAPARAMNFD_LOC=The file oraparam.ini could not be found at %s S_ERPERDSP_7= echo $DISPLAY S_ERPERDSP_8=- Make sure that client users are authorized to connect to the X Server. S_ERPERDSP_9=To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command: S_CHECKING_FOR_OS_VERSION= Checking operating system version: must be S_CHECKING_FOR_PROCESSOR= Checking PROCESSOR: must be S_ERONE_INV_ENTRY=One invalid entry S_NOT_FOUND=: not foundS_ACTUAL_SWAP=. Actual %d MBS_ERPERDSPXCLOCKLOC=Typical path for xclock: %s S_ERUSR_PARAMFILE_NOT_FOUND=WARNING: User specified paramFile: %s not found S_ERROR_JRE_LOCATION_WIN=The location entered doesnt have a valid JRE/JDK ( \bin\java.exe ).S_CONTINUE_YES= User Selected: Yes S_ERMALLOC=Cannot malloc %d bytes, system out of memory. Exiting Oracle Universal Installer S_UNZIP_FAILED= Invalid source path '%s' specified for unzip. Unzip command failed. Please check oraparam.ini and specify a valid source path. S_CHECK_FOR_BUNDLE_FAILED= >>> bundle %s version %s is missingS_ERGOSLST=Error in %s: %d S_PROCESSOR_OPS_AT=processor operates atS_CHECK_FOR_PATCH_FAILED= >>> patch %s is missingS_AUTO_CHECK_FOR_CPU_FAILED= >>> Could not execute auto check for CPU using command %sS_REGISTRY_KEY_TOO_LARGE= Registry key is too large. S_ACTUAL_CPU=. Actual %d MHzS_ERPERDIR= Error in writing to directory %s. Oracle Universal Installer needs you to have permission in this area to install. Installation cannot continue. Please make sure TEMP is set to a valid writable directory. S_SFAILED= Failed <<<<S_FAILED_OPTIONAL= Some optional pre-requisite checks have failed (see above). S_ERR_INVALID_PREREQ_CONFIG_LOC=The following PREREQ_CONFIG_LOCATION does not exist:%s. You must specify the PREREQ_CONFIG_LOCATION parameter in oraparam.ini or at the command line before Oracle Prerequisite Checker can proceed.S_IGNORE_REQ_SYS_PREREQ= >>> Ignoring required pre-requisite failures. Continuing... S_EXECVP_ARGS= Execvp of the child jre : the cmdline is %s, and the argv is S_CERTIFIED_VERSION=Certified VersionsS_ERRINVCHARINPATH=Invalid characters found in path '%s' for '%s' in file '%s'.Please enter correct path for central inventory location.S_FAILED_TO_OPEN_REGISTRY= Failed to open Registry key S_GMAKE_WRONG_VERSION_MSG=Gmake is the wrong version. It must be one of %s S_SPECIFY_VALID_JDK_ONLY_LOCATION=Please specify a valid JDK location :S_LNXMHZ_MSG=cpu MHzS_CHECK_FOR_DISP_COL= Checking monitor: must be configured to display at least %s colors (y/n) [n] S_FAILED_PATCHES_SOLARIS= Tip: You can apply the J2SE Solaris Recommended Patch Cluster to satisfy the patch pre-requisites. Patches that are part of the J2SE Solaris Recommended Patch Cluster but not listed in the log are however, not required for this installation. S_FORK_RET= Forking the child jre process : the return value is : %d S_SPECIFY_VALID_JRE_ONLY_LOCATION=Please specify a valid JRE location :S_ERGTRGVL=Unable to Get Registry Value %s\%s S_ERJRE_MISSING=ERROR: JRE missing in scratch pathS_SWLIST_SOFTWARE_MSG=SoftwareS_IGNORE_PATCH_SYS_PREREQ= >>> Ignoring PATCH pre-requisite failures. Continuing... S_PERL_WRONG_VERSION_MSG=Perl is the wrong version. It must be one of %s S_CHECKING_FOR_SERVICE_PACK= Checking for SERVICE_PACK: must be S_PRE_REQREQ_PASSED= All installer requirements met. S_PERL_RIGHT_VERSION_MSG=Perl is version %s S_CHECKING_FOR_DISP_COL= Checking monitor: must be configured to display at least %s colorsS_FAILED_PATCHES_2=If you have installed vendor-approved patches that obsoleted the missing patches, you can continue with the installations. If not, refer to the Installation Guide for further details and download locations. S_FAILED_PATCHES_1= One or more operating system patches are missing or not at the required level. You may refer to '%s' for details. S_OUI=Oracle Universal InstallerS_ERFINDFILE=ERROR Cant find any file S_CANNOT_EXECUTE=cannot executeS_ACTUAL_TEMP_SPACE=. Actual %d MBS_HIGHER_PATCH_FOUND= >>> found higher version of patch %s i.e. patch %sS_UMASK_VALID= Using the umask value '%s' available from oraparam.ini S_FAIL_CHECKING_FOR_TEMP_SPACE= Checking temp space: %d MB available, %s MB required.S_ENTER_ENTER= Enter Enter to quit S_JVMLOADMSG=Initializing Java Virtual Machine from %s. Please wait... S_INVALID_FILESET_FORMAT= >>> Invalid format specified for fileset %s S_CHECKING_FOR_PACKAGES= Checking operating system packages: S_FOUND_PATCH=; found S_CHECKING_FOR_GMAKE_VERSION= Checking the version of Gmake: must be %s S_ERREGKEY=Failed to open Registry key S_OPTIONAL_PRE_REQ=optionalS_IGNORE_OPT_SYS_PREREQ= >>> Ignoring optional pre-requisite failures. Continuing... S_CHECKING_FOR_CPU= Checking if CPU speed is above %s MHzS_CHECKING_FOR_PATCH= Checking for patch S_EXIT_MSG= Exiting Oracle Universal Installer, log for this session can be found at %s S_DEF_PARAMFILE=Using default paramFile: %s S_ERBOOTSTRAP= Error in writing to directory %s. Please ensure that this directory is writable and has atleast %d MB of disk space. Installation cannot continue. S_CMDLINE_ARG_ELTS=Command line argument array elements ... S_ERVRVLBN=%s = %s S_FAIL_CHECKING_FOR_SWAP= Checking swap space: %d MB available, %s MB required.S_SPASSED= PassedS_UMASK_NOT_AVAILABLE= No umask is available from oraparam.ini. Using the default value '007'. S_CHECKING_FOR_GLIBC_VERSION= Checking for glibc version %s S_SPASSED_ON_NEWLINE= Passed S_UMASK_INVALID= umask value '%s' available from oraparam.ini is invalid. Using the default value '007'. S_ERPERDSP_11=To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock': S_LNX_KERNEL_FAILURE_MSG= The Linux Kernel requirement is %s or higher. The current version of Linux Kernel on the system is %s. This version is not supported by Oracle Corporation. S_ERPERDSP_12= %% S_ERPERDSP= DISPLAY not set. Please set the DISPLAY and try again. S_ERPERDSP_10=%% xhost + S_INSTALLER_APP_NAME=Universal InstallerS_SPECIFY_VALID_JRE_LOCATION=Please specify a valid JRE/JDK location :S_ERPERROT= The user is root. Oracle Universal Installer cannot continue installation if the user is root. S_ERPERDSP_13=If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance. S_HIGHER_THAN=Higher than %sS_PERL_NOT_FOUND_MSG=Perl is not found in the path S_TOTAL_ARGS=Total args: %d S_ERORAPARAMNFD= The file oraparam.ini is missing, hence the Oracle Universal Installer cannot be run. Please ensure a valid oraparam.ini file is present in the install directory.S_PRE_REQ_RETRY_REQ= Rechecking installer requirements.... S_CHECKING_FOR_PATCHES= Checking operating system patches: S_BOOTSTRAPMSG=Preparing to launch Oracle Universal Installer fromS_INVALID_INVPTRLOC_ARG= Invalid command line argument '%s'.The correct usage is '-invPtrLoc ' S_ERRINVPATH=Invalid entry '%s' for '%s' in file '%s'.Please enter absolute file path for central inventory location. S_NO_PREQ_RUN= No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.S_ERFILE_MISSING=ERROR(3): File '%s' may be missing. S_CHECKING_REQ_PREREQ= Checking installer requirements... S_USING_PARAMFILE=Using paramFile: %s S_SPECIFY_JDK_ONLY_LOCATION=Please specify JDK location ( Ex. /home/jdk ), /bin/java should exist :S_ERROR64RET=Error64 returned:%s:S_OBSOLETED_PATCH=; found %s obsoleted S_EXECVP_RET= Execvp of the child jre : the return value is : %d S_CHECKING_FOR_TEMP_SPACE= Checking Temp space: must be greater than %s MBS_CHECK_FOR_PACKAGE_FAILED= >>> Package %s is missingS_ERFAILED_ASSIGN_BYTES=Failed to assign %d bytes S_AUTO_CHECK_FOR_DISPLAY_FAILED= >>> Could not execute auto check for display colors using command %s. Check if the DISPLAY variable is set.S_UNZIP_COMMANDLINE= The commandline for unzip: S_SPECIFY_JRE_ONLY_LOCATION=Please specify JRE location ( Ex. /home/jre ), /bin/java should exist :S_ERJAVA_HOME_ENV_1=Cannot find JAVA_HOME environment variable. S_ERJAVA_HOME_ENV_2=This variable must be set before invoking the installer. S_FAILED_PRE_REQ_1= Some requirement checks failed. You must fulfill theseS_ERJRENFD=The Java RunTime Environment was not found at %s. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version %s or higher and try again. S_FAILED_PRE_REQ_2= requirements before continuing with the installation,S_SPECIFY_JRE_LOCATION_WIN=Please specify JRE/JDK location ( Ex. c:\jre ), \bin\java.exe should exist :S_EXEC_FAILURE= >>> Could not execute %sS_PATCH_NOT_FOUND=There was no data forS_CHECKING_FOR_BUNDLE= Checking for bundles : S_CORRUPTED_ORAPARAM_FILE=oraparam.ini file seems to be corrupt. Exiting Oracle Universal Installer. S_SWAP_EXEC_FAILURE= Execute permission denied on %s. Cant perform swap space checksS_EROPRGKY=Unable to Open Registry Key %s S_ERRNO_IS=ERRNO is %d S_CHECK_FOR_CPU= Check if CPU speed is above %s MHzS_CHECKING_FOR_PERL_VERSION= Checking the version of Perl: must be %s S_CHECKING_FOR_FILESET= Checking for filesets : S_JRELOC_ERROR_NOCONSOLE_WIN=JRE Location is either invalid or not specified. Please specify Valid JRE locationS_INVALID_JRE_HOME= Invalid JRE passed. Please specify JRE location ( Ex. /home/jre ), /bin/java should exist. S_GMAKE_NOT_FOUND_MSG=Gmake is not found in the path S_LINUX_NO_PATCH_CHECK=No patch checks necessary for Linux S_EXIT_CONTINUE= Please press Enter to exit...S_TOTAL_SWAP_MESSAGE=Total swap allocationS_ACTUAL=. Actual %sS_INVALID_TEMP_SPACE_REQ= Invalid temp space requirement : %s MBS_CONTINUE=Continue? (y/n) [n] S_FAILED_PRE_REQ_4=time they will be rechecked. S_ERREGTOOLARGE=Registry Key too large S_FAILED_PRE_REQ_3=at which S_ERPERM_1=ERROR(1): Permission setting of '%s' failed. S_ERVMOUNT_INFO=Cannot get vmount info. S_CHECK_FOR_FILESET_FAILED= >>> fileset %s is missingS_ERR_PREREQ_CONFIG_LOC=Error: You must specify the PREREQ_CONFIG_LOCATION parameter in oraparam.ini or at the command line before Oracle Prerequisite Checker can proceed.S_REQUIRED_PRE_REQ=requiredS_LDLIBPATH_VAR= LD_LIBRARY_PATH environment variable :S_ERPERM_2=ERROR(2): Permission setting of '%s' failed. S_INVALID_SWAP_SPACE_REQ= Invalid swap space requirement : %s MBS_ERR_REG_ACCESS=Error in accessing system registry. You may not have enough permissions to modify registry. Installation cannot continue.S_INVALID_BUNDLE_FORMAT= >>> Invalid format specified for bundle %s S_ERRORUNIXCDMOUNT=Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.You can change the working directory by typing 'cd' (e.g. cd /home) and then execute the 'runInstaller' command by typing its full path (e.g. /mnt/cdrom/runInstaller)S_NOT_FOUND_PATCH=; not found S_WAITMSG=Please wait ...S_STARTINSTALLERMSG=Starting Oracle %s... S_ERROR_JRE_LOCATION=The location entered doesnt have a valid JRE/JDK ( /bin/java ).