ISO8859-1&%+2Cp Gi  F4 F{ FF *P+{++&&&'M'uTB 5A 7; y  C   1!F <"* #& $8 %5 & D   =8R/  7 8  g4wDISKETTE MEDIA SERVICE AIDDiskette Media Service Aid Description: This service aid allows you to determine if a formatted diskette media has any defects. This is accomplished by reading the entire diskette to determine if there are bad sectors present. To continue, press Enter.The Diskette Verification Test has been completed. Diskette Location.........Drive %1$d Diskette Type.............%2$s Diskette Capacity.........%3$d Sectors Reported Bad......%4$d Sectors Reported Good.....%5$d %6$s To continue, press Enter.The diskette verified on all sectors.The diskette did NOT verify on all sectors.Diskette Location.........Drive %1$d Diskette Type.............%2$s %3$s Diskette verification is in progress. Please stand by.Verification indicates bad sectors have been found on the diskette.DISKETTE REQUIRED: %1$s INSERT.........the required diskette into drive %2$d %3$s When finished, press Enter.REMOVE.........the diskette from drive %d. When finished, press Enter.Diskette Type And Drive Location Selection Move the cursor to the type of diskette that requires verification, then press Enter. Drive 0 - 2.0 MB Diskette - 2 sides / 80 tracks / 18 sectors per trackDrive 0 - 1.0 MB Diskette - 2 sides / 80 tracks / 9 sectors per trackDrive 1 - 1.2 Mb Diskette - 2 sides / 80 tracks / 15 sectors per trackDrive 1 - 360 Kb Diskette - 2 sides / 40 tracks / 9 sectors per trackFormatted High Capacity (2.0 MB) 3.5 Inch Formatted Low Capacity (1.0 MB) 3.5 Inch Formatted High Capacity (1.2 MB) 5.25 Inch Formatted Low Capacity (360 KB) 5.25 Inch High Capacity 2.0 MB 3.5 Inch DisketteLow Capacity 1.0 MB 3.5 Inch DisketteHigh Capacity 1.2 MB 5.25 Inch DisketteLow Capacity 360 KB 5.25 Inch DisketteAn ERROR was detected during the verification test. %1$s To continue, press Enter.The error indicates that a diskette was NOT inserted in the drive. The error indicates that the diskette is NOT formatted correctly.Verification has been halted. Diskette status is not known.CLOSE..........the drive. Diskette Location.........Drive %1$d Diskette Type.............%2$s Diskette Capacity.........%3$d Sectors Checked ..........%4$d Sectors Reported Bad......%5$d Sectors Reported Good.....%6$d Sectors Remaining.........%7$d Do you wish to continue verification of this diskette? Move cursor to selection, then press Enter.YES - Continue verificationNO - ExitDrive 0 - 4.0 MB Diskette - 2 sides / 80 tracks / 36 sectors per trackFormatted High Capacity (4.0 MB) 3.5 Inch High Capacity 4.0 MB 3.5 Inch DisketteThe diskette drive which was selected is not accessible.There are no diskette drives attached to this system.A diskette drive is required to run this service aid. This service aid could not find the device. If this device is present on the system, run diagnostics to determine the problem. To continue, press Enter.DISKETTE MEDIA SERVICE AID This service aid provides functions to format or certify diskette media. Diskette Certification is accomplished by reading the entire diskette to determine if there are bad sectors present.Format Diskette.Certify Diskette.REMOVE.........the diskette, if any, from the diskette drive.INSERT.........a %d MB diskette into the diskette drive.When finished, press Enter.Please stand by.Move the cursor to selection, then press Enter.Formatting the disketteThe format of this diskette has successfully completed.The format did not complete successfully. this could be caused by a faulty diskette or a defective drive. Run diagnostics on this diskette drive to assure that it is functioning properly.Press Enter to continue.Diskette Type And Drive Location Selection Move the cursor to the type of diskette, then press Enter. Usage: ufd [-d logical device ] [-o format|certify] ufd: Resource not found.