ùISO8859-1TXu[ÑÁí^¯( / 6 = †D ,ËÄøN½Þ ª ë –  — £$ ° Õ ï   7 Q S R ¥ ø   5 H _ z • ¥YESNOThe following test requires a wrap plug with a part number from the following list: %1$s Do you have this wrap plug?UNPLUG.........the cable, if attached, from the connector on the Async adapter. PLUG...........the wrap plug into the Async adapter connector. Use a wrap plug with a part number from the following list: %1$sUNPLUG.........the wrap plug from the connector on the Async adapter. PLUG...........the cable, if removed, into the connector on the Async adapter.UNPLUG.........the cable, if attached, from the connector on the Async adapter.Select the port to test. Port 0Port 1Port 2Port 3PLUG...........the DB-9 Fan-out Cable, if not attached, into the Async Adapter. UNPLUG.........the Async cable, if attached, from the %1$s connector on the DB-9 Fan-out Cable. PLUG...........the wrap plug into the %1$s connector of the DB-9 Fan-out Cable. Use a wrap plug with a part number from the following list: %2$sPLUG...........the DB-9 Fan-out Cable, if not attached, into the Async Adapter. UNPLUG.........the wrap plug from the %1$s connector on the on the DB-9 Fan-out Cable. PLUG...........the Async cable, if removed, into the %1$s connector on the DB-9 Fan-out Cable.PLUG...........the DB-9 Fan-out Cable, if not attached, into the Async Adapter. UNPLUG.........all Async cables, if attached, from the connectors on the DB-9 Fan-out Cable.PLUG...........the RJ48-DB9 Cable, if not attached, into the Async Adapter. UNPLUG.........the Async cable, if attached, from the RJ48- DB9 Cable. PLUG...........the wrap plug into the RJ48-DB9 Cable. Use a wrap plug with a part number from the following list: %1$sPLUG...........the RJ48-DB9 Cable, if not attached, into the Async Adapter. UNPLUG.........the wrap plug from the RJ48-DB9 Cable. PLUG...........the Async cable, if removed, into the RJ48-DB9 Cable.PLUG...........the RJ48-DB9 Cable, if not attached, into the Async Adapter. UNPLUG.........all Async cables, if attached, from the RJ48-DB9 Cable.Serial PortEEH failure.Configuration register test failure.Adapter I/O test failure.Timer test failure.Interrupt test failure.Internal wrap test failure.External wrap test failure.Error Log Analysis indicates that this adapter has failed due to a reset failure.Error Log Analysis indicates that this adapter has failed due to a hardware error.Opening adapterRunning PCI Config testRunning I/O Reg testRunning Timer testRunning Interrupt testRunning Internal WpBk testRunning External WpBk testClosing adapter