ISO8859-1($K4H `  #   0 Kb[e4 $ Y{  w ? H S g, A A-6F`}1$$:5_5_8%JMPcQ7. ,O |  ; *'TE,cxZU-W2'^8ZW @7!;x"# x$!d%"P&#k'$a(p$~)j$*b%Z+y%,&7-&.'U/'0L(1)2)3*4+s5,K6,7-8.: c.t1&12%34i|5 5 67Update System or Service Processor FlashUse this selection to update the System or Service Processor flash microcode from a flash update image file. The system then reboots to complete the flash update. This service aid runs only on CHRP platform systems.Update and Manage System FlashUse this selection to validate a flash update image file and then use this image to update the system flash microcode. This task reboots the system to perform the flash update. This selection can also be used to reject or commit the temporary flash image.update_flash: Command is supported. This system is capable of supporting multiple partitions. If this system is partitioned then all the other partitions must be stopped before updating the system firmware. Extract FW Image From RPMUse this selection to extract the system FW image file from an RPM package.UPDATE SYSTEM OR SERVICE PROCESSOR FLASH SERVICE AIDUPDATE AND MANAGE FLASHEXTRACT SYSTEM FIRMWARE FROM RPMdiskette deviceflash update image fileDISKETTEFILE SYSTEMNOYESFILE ON NIM MASTERValidate and Update System FirmwareValidate System FirmwareCommit the Temporary ImageReject the Temporary ImageREMOVABLE MEDIAEnter the diskette device (the default device is shown). When finished, use 'Commit' to continue.This service aid will update the System or Service Processor flash for CHRP platform systems. The flash update image file is copied from the source selected below, to the file /var/update_flash_image. Then the system is rebooted to perform the flash update. Enter the diskette device (the default device is shown). When finished, use 'Commit' to continue.This service aid will update the System or Service Processor flash for CHRP platform systems. The flash update image file is copied from the source selected below, to the file /var/update_flash_image. Then the system is rebooted to perform the flash update. Select the source of the flash update image file:Enter the fully qualified path name of the file with the flash update image. The file will be copied to /var/update_flash_image. When finished, use 'Commit' to continue.***** WARNING: Continuing will reboot the system! ***** Do you wish to continue? Make selection, use 'Enter' to continue.The file /var/update_flash_image can be removed after the reboot. ***** WARNING: Continuing will reboot the system! ***** Do you wish to continue? Make selection, use 'Enter' to continue.Please select a number from the following list. That file name following the number will be used for the flash update. Enter the flash update image file on the diskette. The file will be copied to /var/update_flash_image. When finished, use 'Commit' to continue.No choice.Enter the path name of the file with the flash update image. The path name must be relative to the SPOT on the NIM master. The file will be copied to /var/update_flash_image. When finished, use 'Commit' to continue.The current permanent system firmware image is %1$s The current temporary system firmware image is %2$sThe system is currently booted from the permanent firmware image.The system is currently booted from the temporary firmware image.Move cursor to selection, then press 'Enter'.This service aid updates the system firmware. The file must be on removable media to update the flash. The flash update image file is copied from the media, then the system is rebooted to perform the flash update. Select the device containing flash update image files. Make selection, use 'Enter' to continue.Select the device containing flash update image files. Make selection, use 'Enter' to continue.This service aid updates the system firmware. The flash update image file is copied from the source selected below, to the file /var/update_flash_image. Then the system is rebooted to perform the flash update. Select the source of the flash update image file:Select the source of the flash update image file:The commit operation was successful.The reject operation was successful.The commit operation is in progress. Please stand by.The reject operation is in progress. Please stand by.The image is valid and would update the temporary image to %1$s. The new firmware level for the permanent image would be %2$s. The current permanent system firmware image is %3$s. The current temporary system firmware image is %4$s.Select the device containing flash update image files. When finished, use 'Enter' to continue.Enter the flash update image file on the device. The file will be copied to /var/update_flash_image. When finished, use 'Commit' to continue.update_flash: Command not supported. Update System or Service Processor Flash is not supported on this system. Error in rewinding the flash update image file to the beginning of the file. At present other process is updating flash update image file. Please try later. The following additional software is needed to run this service aid: bos.dosutil An error occurred accessing the diskette. The diskette drive %1$s may not be available on this system or you may have entered an incorrect diskette drive name or you may not have inserted the diskette in the diskette drive. The file %1$s already exist. Do you wish to overwrite? Error in reading the data from the file %1$s. Error in writing the data to the file %1$s. Error in opening the file %1$s No data in the file %1$s The fully qualified file name must be entered to continue. The diskette device name must be entered. Insufficient memory. malloc( ) failed. ***** WARNING: Continuing will reboot the system! ***** Do you wish to continue? Command failed. %1$s returned errno = %2$d. Enter 1=Yes or 2=No Usage: update_flash [-q] -f file-name update_flash [-q] -D device-name -f file-name update_flash [-q] -D device-name -l Can't catch SIGINT!.Can't catch SIGQUIT!.Error initializing ASL.Not enough space to copy file. Attempt to run from online Diangostics or add more memory.The following additional software is needed to run this service aid: bos.rte.archive The diskette format could not be determined. Unable to list the files on the diskette in %1$s. Not enough space in %1$s to copy %2$s. This selection is invalid.The chosen image file is corrupted or has been truncated. The file should be 1 MB in length. Unable to successfully check the validity of the image. The fileset bos.dosutil is not installed on this system. If this diskette is a DOS diskette this application should be exited and bos.dosutil should be installed. If this application is not exited, you will be prompted for a backup format diskette. You will see this on your screen: Mount volume 1 on /dev/fd0. Press the Enter key to continue. At that point, press CTRL-C to exit the application if your diskette is not in backup format. The fileset bos.dosutil is not installed on this system. If this diskette is a DOS diskette, this application should be exited and bos.dosutil should be installed. Do you wish to exit the application at this time?(y or n) If your diskette is not in backup format, use CTRL-C to exit. The user does not have the authority to run this command. Usage: update_flash [-q | -v] -f file-name update_flash [-q | -v] -D device-name -f file-name update_flash [-q | -v] -D device-name -l update_flash -c update_flash -r The commit operation failed. Verify that the system is booted from the temporary system firmware image. If the commit operation still fails after booting the system from the temporary image, then contact your service support structure.The reject operation failed. Verify that the system is booted from the permanent system firmware image. If the reject operation still fails after booting the system from the permanent image, then contact your service support structure.The file provided is not a valid firmware image. Verify that the file is a firmware image appropriate for this system's model and type. Verify that the firmware image is not corrupted. If neither check leads to the source of the problem, then contact your service support structure.This partition does not have the authority to perform the requested function. Verify that this paritition has service authority. If the problem persists after granting the partition service authority, then contact your service support structure.Error accessing the device. A software error occurred while accessing %1$s. Contact your service support structure for further assistance. %1$s indicates that it is busy. Please make sure that it is not in use by another process and try again. There was a problem accessing %1$s. Please make sure that there is mountable media in the drive. No firmware images were found on %1$s. Firmware images conform to the following naming convention: .img There was a problem accessing the firmware image %1$s. Please make sure that this is a valid firmware image and that it is not corrupt. This partition does not have the authority to update the system firmware. Please refer to the documentation for your system for more information. Usage: update_flash [-q] -f file-name update_flash [-q] -D device-name -f file-name update_flash [-q] -D device-name -l update_flash -s Usage: update_flash [-q | -v] -f file-name update_flash [-q | -v] -D device-name -f file-name update_flash [-q | -v] -D device-name -l update_flash -c update_flash -r update_flash -s update_flash: An unknown error occurred while checking for command support. The following partitions are active: %1$s The system firmware cannot be updated while there are active partitions. Shutdown all of the active partitions and retry the command. *** WARNING: Unable to determine status of all partitions *** The firmware update will not be active until all partitions are shutdown. Do you wish to continue? Make selection, use 'Enter' to continue. The selected firmware image can not be applied. The Build Date of the firmware image selected is %1$s. The System's Microcode Entitlement Expiration Date is %2$s. Please contact your service support structure.The selected firmware image can not be applied. The Build Date of the firmware image selected is %1$s. The System's Update Access Key Expiration Date is %2$s. Please contact your service support structure.A software error occurred while extracting Firmware file. Please contact your service support structure for further assistance. Usage: update_flash [-q | -v] -f file-name.[img|rpm] update_flash [-q | -v] -D device-name -f file-name update_flash [-q | -v] -D device-name -l update_flash -c update_flash -r update_flash -s A software error occurred during link to extracted Firmware file. Please contact your service support structure for further assistance. A software error occurred while copying extracted Firmware file. Please contact your service support structure for further assistance. The file name that is entered in this screen will be copied to /var/update_flash_image to prepare for the flash update. A fully qualified path name must be entered for the flash update image file. A fully qualified path name begins with the root directory. The root directory is followed by any number of directories, each separated by a slash, and lastly the file name. For example, if the update image is in the file "new.image", which is stored in the directory "support", which is a directory of "home", which is a directory of root. Then the fully qualified path name would be: "/home/support/new.image"Enter the device name of the diskette drive that will be used to read the flash update image file from the diskette.Enter the name of the flash update image file that should be read from the diskette. The file will be copied to /var/update_flash_image.The file name that is entered in this screen will be copied to /var/update_flash_image to prepare for the flash update. A path name relative to the SPOT on the NIM master must be entered for the flash update image file. For example, if the update image is in the file "new.image", which is stored in the directory "/export/spot/myspot/usr/lib/microcode" on the NIM master. Then the relative path name would be: "/usr/lib/microcode/new.image"Enter the name of the flash update image file that should be read from the device. The file will be copied to /var/update_flash_image.This selection updates the temporary system firmware image after validating the new image. If the validation is successful, then this results in a system reboot.This selection validates a new flash image. No update to the temporary system firmware occurs as a result of this selection.This selection commits the temporary system firmware image when booted from the temporary image. This results in the permanent image being overwritten by the temporary image.This selection rejects the temporary system firmware image when booted from the permanent image. This results in the temporary image being overwritten by the permanent image.