ISO8859-164'"\;965 lpvs-)0% PV @#OsError Log Analysis indicates adapter function failure.Diagnostics indicates adapter configuration failure.Configuration register test failedIO Register test failedVPD test failedEEH failure during test%1$06.6lx ADDITIONAL INFORMATION FOR (%2$s) IN LOCATION %3$s Error Log Analysis has detected lost communication between the adapter and anything that is attached to it. Check the port's cable and connection. If error persists, run the USB service aid to determine which device can not communicate with the adapter.%1$06.6lx ADDITIONAL INFORMATION FOR %2$s IN LOCATION %3$s Error Log Analysis has detected lost communication between the adapter and anything that is attached to it. Check the port's cable and connection. If error persists, run the USB service aid to determine which device can not communicate with the adapter.Loop mode testing consists of error log analysis only.YESNOThe following test requires that no devices be attached to the USB Adapter. Do you have any devices attached to %1$s?**** Warning **** Before un-configuring the devices, please ensure they are not in use by other users. UNCONFIGURE......all devices attached to %1$s UNPLUG...........all devices attached to %1$sThe following test requires that no devices be attached to the USB Adapter. Diagnostics detected devices configured on %1$s. The test requires these devices to be unconfigured and removed from the system. Are you able to un-configure these devices and remove them from the system?UNPLUG.......all the devices attached to %1$sOnly Error log analysis will be performedPLUG.......all the removed USB devices into %1$sNote: To use the USB devices attached to %1$s, you need to run 'cfgmgr -l %1$s'The following test requires that no devices be attached to the USB Adapter. Are you able to un-configure these devices and remove them from the system?Opening deviceRunning Configuration register testRunning IO Register testRunning VPD testClosing device