ùISO8859-1,03Ž9È®Ý Œ£ºÕ1ðO"'r&š 6Á ø5Ut’² Ñ ïéþPèï 9r )¥ œ€ B¼ ÃYESNOfiberThe following test requires a wrap plug for the %1$s connector. It uses one of the following Part Numbers: %2$s. Do you have this wrap plug:UNPLUG.........the network cable, if attached,from the connector on the adapter. PLUG...........the wrap plug into the adapter connector. Use a wrap plug with one of the following Part Numbers: %1$s.UNPLUG.........the wrap plug from the connector on the adapter. PLUG...........the network cable, if removed, into the connector on the adapter.Registers Test Failed.Interrupt Test Failed.Internal Wrap Test Failed.External Wrap Test Failed.Failure to initialize due to a self-test failure.Failure to initialize due to a problem while reading the EEPROM on the adapter.Enhanced Error Handling failure on bus.Enhanced Error Handling logic failure.Enhanced Error Handling failure while testing adapter.Opening deviceRunning registers testRunning interrupt testRunning internal 1000 Mbps testRunning internal 100 Mbps testRunning internal 10 Mbps testRunning external 1000 Mbps testRunning external 100 Mbps testRunning external 10 Mbps testClosing device%1$06.6lx ADDITIONAL INFORMATION FOR %2$s IN LOCATION %3$s No trouble was found with this adapter. However Error Log Analysis indicates that there recently may have been a network problem. If this adapter is connected to a network, and if you you are experiencing problems with network communications, check for a loose or defective cable or connection. If a switch or another system is directly attached to this adapter, verify it is powered up, configured, and functioning correctly.%1$06.6lx ADDITIONAL INFORMATION FOR %2$s IN LOCATION %3$s No trouble was found with this adapter. However Error Log Analysis indicates that there may be a problem with the connection to the network. Check for extensive network traffic. If this is not the cause, and if you are still experiencing problems, run advanced diagnostics.%1$06.6lx ADDITIONAL INFORMATION FOR %2$s IN LOCATION %3$s No trouble was found with this adapter. However Error Log Analysis indicates that there may be a problem with the connection to the network. Check for extensive network traffic.%1$06.6lx ADDITIONAL INFORMATION FOR %2$s IN LOCATION %3$s Error Log Analysis indicates that a failover operation has failed. No port on this adapter has connectivity. Check for a loose or defective cable or connection to this adapter. If a switch or another system is directly attached to this adapter, verify it is powered up, configured, and functioning correctly.%1$06.6lx ADDITIONAL INFORMATION FOR %2$s IN LOCATION %3$s Error Log Analysis indicates that there recently has been a network problem. Although a failover attempt is successful, you may now have only one working port. Check for a loose or defective cable or connection to this adapter. If a switch or another system is directly attached to this adapter, verify it is powered up, configured, and functioning correctly. If no problem is found with the cable and switch, check the adapter and run Advancd Diagnostics in Problem Determination mode.%1$06.6lx ADDITIONAL INFORMATION FOR %2$s IN LOCATION %3$s Error Log Analysis indicates that there recently has been a network problem. Although a failover attempt is successful, you may now have an adapter port that requires your attention. Check for a loose or defective cable or connection to this adapter. If a switch or another system is directly attached to this adapter, verify it is powered up, configured, and functioning correctly.