ùISO8859-1'ÀÔêý(CX k ?‚ 3 <ö -3av¬ÆÙø:>M6ŒÃâñú& 0GFa 2¨!YÛ"H5#'~$(¦%+Ï&)û'*%PøaóZ¨ NÊ ÷ Â Ô ì ,G%ZFIFO empty bit set.FIFO empty bit clear.FIFO full bit set.FIFO full bit clear.FIFO data miscompare.SCSI FIFO data miscompare.SCSI FIFO underflow.SCSI parity error.SCSI FIFO flags error.Miscompare during the write/read of the configuration register.Error during the write/read of the memory register.Miscompare during the write/read of the memory I/O register.Error reading the PCI configuration register.Adapter POST failed.Arbitration test failed.Function could not complete.SCSI bus data miscompare.No terminal power.The parent device open failed.Invalid device vendor ID.Error Log Analysis indicates a PCI SCSI-2 adapter failure.Error Log Analysis indicates a PCI SCSI-2 adapter PTC failure.Error Log Analysis indicates a PCI SCSI-2 bus failure.Cable, terminator, SCSI deviceSCSI SubsystemSoftwareSCSI bus errorSCSI configuration read or write errorSCSI wrap or PTC errorSCSI adapter test failureError Log Analysis indicates that the adapter could not be configured.Error Log Analysis indicates a terminator problem.Error Log Analysis indicates that multiple attempts to reset the SCSI bus have timed out.Error Log Analysis indicates that multiple SCSI bus errors have occured.Enhanced Error Handling failure on bus.Enhanced Error Handling failure on chip.Enhanced Error Handling failure on adapter.Error Log Analysis idicates an EEH error.Error Log Analysis indicates an EEH error.PCI SCSI ADAPTER%1$06.6lx ADDITIONAL INFORMATION FOR (%2$s) IN LOCATION %3$s A SCSI bus problem has been detected. Use the SCSI Problem Isolation Procedure for this adapter. For more information, refer to the Common Diagnostics and Service Guide for this system.%1$06.6lx ADDITIONAL INFORMATION FOR (%2$s) IN LOCATION %3$s A PTC problem has been detected. Use the SCSI Problem Isolation Procedure for this adapter. For more information, refer to the Common Diagnostics and Service Guide for this system.%1$06.6lx ADDITIONAL INFORMATION FOR (%2$s) IN LOCATION %3$s Error Log Analysis has detected errors logged against this device within the last 24 hours. At this time the errors do not indicate a hardware problem that requires a hardware service action. For more information about the errors logged, run the Error Report Service Aid. For more information, refer to the Common Diagnostics and Service Guide for this system.%1$06.6lx ADDITIONAL INFORMATION FOR (%2$s) IN LOCATION %3$s The PCI SCSI adapter type could not be determined. For more information, refer to the Common Diagnostics and Service Guide for this system.%1$06.6lx ADDITIONAL INFORMATION FOR (%2$s) IN LOCATION %3$s The SCSI arbitration test has failed. This test may fail if another SCSI adapter is sharing the SCSI bus this adapter is connected to. One example of this would be two SCSI adapters connected to a single SCSI enclosure service. This message should be ignored if another SCSI adapter is sharing the SCSI bus with this adapter. If no other SCSI adapters are present on the SCSI bus this adapter is connected to, then report %4$s SRN to your field representative. Initializing device ...Running register and FIFO testsRunning SCSI wrap and PTC testsChecking error log entriesClosing device ...Running Enhanced Error Handling tests