ISO8859-1GXYZ[4lG1 ; U   +4jdY'[#Bf:_= / Y( J 3 2 1 d 7 !D "K #@ M$B %7 & ' $(J )v *I +( ,$ -).D/b0}1%2#3456(:7c8!9%:;O<99=.s>A?@ A  BC(D HERF1rGBPlease stand by.This test may take up to %1$d minute(s) to complete.Testing multiple times. %1$6d passes completed. %2$6d errors logged. To stop the test, press Cancel.Attempting to start the optical disk drive motor.The optical disk format is incompatible with the drive. Please use a rewritable optical disk that is compatible with this drive.The optical disk format is corrupted. Use the Format Service Aid to format the disk.The following tests require a known good formatted rewritable optical disk to perform diagnostic tests. Do you have the required optical disk? Move cursor to selection, then press Enter.The following tests require a test optical disk (Part Number %1$s) to perform diagnostic tests. Do you have the required optical disk? Move cursor to selection, then press Enter.Move cursor to selection, then press Enter.NOYESUNLOAD ........ optical disk(if any) from the drive.LOAD .......... a known good formatted rewritable optical disk into the drive for testing.LOAD .......... the test optical disk (Part Number %1$s) into the drive for testing.LOAD ......... the disk into the drive.LOAD ........ the cleaned test disk or a known good test disk into the drive.A conflict has occurred while reserving the optical device. ***** WARNING ***** The device may be reserved by another host. The result of continuing this test will reset the device and may cause a loss of data. Do you want to continue the test? Move cursor to selection, then press Enter.To continue, press Enter.Unable to get the inquiry data for the optical disk drive.Have you checked the cables for loose connections or defects and the SCSI ID for any conflicts?CHECK ...... the cables for any defects or loose connections.ENSURE ..... that there is no SCSI ID conflict.RERUN ...... diagnostics on this device.Have you cleaned the test disk or replaced it with a known good test disk?The tests indicate that a media error has occurred.FOLLOW ...... the cleaning procedure for the disk.EXIT ........ from diagnostics.The test indicates that there is no media in the drive.A %1$s is required to perform diagnostics on the optical disk drive.Error Log Analysis indicates that an irrecoverable data error has occurred.Do you want to continue with diagnostics to isolate the problem?Error Log Analysis indicates that an equipment error has occurred.The media in the optical disk drive is write protected.WRITE ENABLE... the media.The test media in the drive is unrecognized by the application. Continuing the test may result in incorrect results. Do you want to continue with the test? NOTE: For loading/unloading procedure, refer to the device documentation.*** WARNING *** The following tests will destroy the data on the optical disk. Do you want to continue with the test? NOTE: The drive may return write protected status for unsupported media.A unit attention condition has occurred.A SCSI command timeout has occurred.A SCSI Reservation conflict has occurred.Failed to reserve the device.An Unknown error occurred.Test Unit Ready command failed.Prevent Media Removal command failed.Allow Media Removal command failed.Mode Sense command failed.Mode Select command failed.The diagnostic test failed.Random Write, Read, Compare test failed.Failed to release the device.The device motor failed to start.Failed to configure the SCSI adapter.Failed to configure the device.Error Log Analysis indicates that the spare sectors on the media are exhausted.Error Log Analysis indicates an irrecoverable data error.Error Log Analysis indicates a hardware error.Error Log Ananlysis indicates that the adapter detected an error.A hardware error occurred.Software.Optical disk.Cables.Cable, terminator or other SCSI devices.BridgeboxFailed to get the inquiry data.TESTING OPTICAL DISK DEVICE %1$s IN LOCATION %2$sTESTING OPTICAL DISK DEVICE %1$s IN LOCATION %2$s IN ADVANCED MODE