ISO8859-15*-@T!h    !E &!%"& #(0$'Y%&'&(')$ *( &+ O,' n-$ .% / 3* 4 ,5! I6! k7 8 9 :( ;) <6 0=M g>I ?* @2 *F( ]G% H+ I JC K. =Gigabit Ethernet-SX PCI Adapter (AE120100)Bus memory addressBus interrupt levelInterrupt priorityReceive queue sizeTransmit queue sizeEnable jumbo framesEnable alternate ethernet addressAlternate ethernet addressPrivate 2048 byte receive mbufsPrivate 4096 byte receive mbufsAdapter firmware debug trace flagIndicates the number of transmit requests that can be queued for transmission by the device driver. Valid values range from 512 through 2048. The default value is 512.Setting this attribute to the yes value indicates that frames up to 9014 bytes in length may be transmitted or received on this adapter. If you specify the no value, the maximum size of frames transmitted or received is 1514 bytes. The default value is no.This is a number between 512 and 8192 (with a default of 1024) which specifies the number of 2048 byte mbufs to be used exclusively with this adapter. They will be used for standard sized packet receive buffers. Use of these mbufs may improve the performance of the adapter with a possible increase in network memory usage.This is a number between 256 and 4096 (with a default of 512) which specifies the number of 4096 byte mbufs to be used exclusively with this adapter. They will be used for jumbo packet receive buffers. Use of these mbufs may improve the performance of the adapter with a possible increase in network memory usage. This attribute will not be used unless the Transmit and receive jumbo frames attribute is set to yes.Virtual equals real memory sizeCopy packet if this many or less bytesEncoded boundary where PCI reads stopEncoded boundary where PCI writes stopAdapter can hold bus for this many wordsUse read multiple command not read linePCI read command to usePCI write command to useEmpty words in read FIFO before PCI opEmpty words in write FIFO before PCI opClock ticks before TX done interruptTX buffers used before TX done interruptRX packets before RX interruptminimum available RX buffer descriptorsUpdate TX index based on this numberClock ticks before statistics updatedClock ticks before RX interruptGigabit Ethernet-SX PCI Adapter (14100401)Software transmit queue sizeTransmit and receive jumbo framesRX buffers before adapter updatedTransmit jumbo framesReceive buffer pool sizeEnable hardware receive checksumEnable Transmit and Receive Flow ControlMedia Speed (10/100/1000 Base-T Ethernet)IBM 10/100/1000 Base-T Ethernet PCI Adapter (14100401)Media Speed (Valid only for the IBM 10/100/1000 Base-T Ethernet PCI Adapter)Media Speed (Valid only for the 10/100/1000 Base-T Ethernet PCI Adapter)Gigabit Ethernet-SX PCI Adapter (ae120100)10/100/1000 Base-T Ethernet PCI Adapter (ae120200)Interrupt events processed per interruptRX buffers processed per RX interruptEnable hardware transmit TCP resegmentationEnable hardware checksum offloadIgnore link state changes within this time period (in milliseconds)Enable delay of open until link state is known