ISO8859-1,D>+*\6P   t l9 ~w % } .Y    G A  Ah ae -0F^ v=\ T0!a"x#g`$A%N &<Y'h(0)%0*&V+},VSCSI BUS SERVICE AID DESCRIPTION This service aid is used to exercise a SCSI bus. The service aid transmits a SCSI Inquiry command to a selectable SCSI address. The service aid will work with any valid SCSI bus. It can be used to diagnose SCSI bus problems that prevent diagnostics from communicating with a SCSI device. The service aid will return one of the following messages: - The service aid transmitted a SCSI Inquiry command and received a valid response back without any errors being detected. - The service aid transmitted a SCSI Inquiry command and did not receive any response. Check that the address is valid, then retry. - The service aid transmitted a SCSI Inquiry command and the adapter indicated a SCSI bus error. - The service aid transmitted a SCSI Inquiry command and an adapter error occurred. - The service aid transmitted a SCSI Inquiry command and an unrecoverable I/O error occured. To continue, press Enter.SCSI BUS SERVICE AID Select the SCSI adapter you wish to exercise.Move cursor to selection, then press Enter.SCSI BUS SERVICE AID Enter the SCSI address for the device .... SCSI BUS SERVICE AID Press Enter to transmit the SCSI Inquiry command to SCSI address %1$d.SCSI BUS SERVICE AID Transmit and receive in process.SCSI BUS SERVICE AID The service aid transmitted a SCSI Inquiry command and received a valid response back without any errors being detected.SCSI BUS SERVICE AID The service aid transmitted a SCSI Inquiry command and did not receive any response back. Ensure that the address is valid, then try this option again.SCSI BUS SERVICE AID The service aid transmitted a SCSI Inquiry command and the adapter indicated a SCSI bus error.SCSI BUS SERVICE AID The service aid transmitted a SCSI Start command and the operation was not successful.SCSI BUS SERVICE AID The service aid transmitted a SCSI Inquiry command and the adapter indicated an unrecoverable I/O error.SCSI BUS SERVICE AID The Inquiry command cannot be sent because the SCSI device was already in use by another process.SCSI BUS SERVICE AID The service aid was unable to open the adapter. The Inquiry command cannot be sent to any device attached to this adapter.SCSI BUS SERVICE AID The address selected is the address for the SCSI adapter. Please enter or select another SCSI address.SCSI BUS SERVICE AID The service aid was unable to determine the address of the adapter.To continue, press Enter.SCSI BUS SERVICE AID The service aid found no SCSI devices in the system.The service aid will exit now. To continue, press Enter.SCSI BUS EXERCISER The SCSI bus exerciser did not find the specified device in the system.A software error has occurred. The SCSI bus could not be tested. USAGE: uscsi [-d ] The device specified is not a SCSI or VSCSI device. SCSI bus exerciser can not be used for this device. This procedure is used to exercise a SCSI bus. It transmits a SCSI Inquiry command to a selectable SCSI address. The exerciser will work with any valid SCSI bus. It can be used to diagnose SCSI bus problems that prevent diagnostics from communicating with a SCSI device. The exerciser will return one of the following messages: - The exerciser transmitted a SCSI Inquiry command and received a valid response back without any errors being detected. - The exerciser transmitted a SCSI Inquiry command and did not receive any response. Check that the address is valid, then retry. - The exerciser transmitted a SCSI Inquiry command and the adapter indicated a SCSI bus error. - The exerciser transmitted a SCSI Inquiry command and an adapter error occurred. - The exerciser transmitted a SCSI Inquiry command and an unrecoverable I/O error occured. Select the SCSI adapter you wish to exercise.Press Enter to transmit the SCSI Inquiry command to SCSI address %1$d.Transmit and receive in process.The exerciser transmitted a SCSI Inquiry command and received a valid response back without any errors being detected.The exerciser transmitted a SCSI Inquiry command and did not receive any response back. Ensure that the address is valid, then try this option again.The exerciser transmitted a SCSI Inquiry command and the adapter indicated a SCSI bus error.The exerciser transmitted a SCSI Start command and the operation was not successful.The Inquiry command cannot be sent because the SCSI device was already in use by another process.The exerciser was unable to open the adapter. The Inquiry command cannot be sent to any device attached to this adapter.The address selected is the address for the SCSI adapter. Please enter or select another SCSI address.The exerciser was unable to determine the address of the adapter.The exerciser found no SCSI devices in the system.The exerciser will exit now.SCSI BUS EXERCISER Selected SCSI Bus: %1$s in location %2$sThe service aid transmitted a SCSI Inquiry command and the adapter indicated an unrecoverable I/O error. The following Inquiry data was returned: %1$sEnter the SCSI ID for the device ....Enter the SCSI LUN for the device ....SCSI ID Enter the SCSI ID that you wish to analyze. Use the 'List' option for valid ID values. SCSI LUN (Logical Unit Number) Enter the SCSI LUN that you wish to analyze. Use the 'List' option for valid LUN values. If you are not sure, leave the LUN at 0.A software error occurred when determining the maximum number of LUNs on the adapter.